What Does Jynxzi Use To Play Clash On Pc – Jynxzi Clash PC Controller Setup

by

If you’re trying to figure out what does jynxzi use to play clash on pc, you’re in the right place. Jynxzi uses a specific gaming controller adapter and software configuration to play Clash on his PC, which he has detailed in his setup guides. This article breaks down every piece of hardware and software he relies on for his high-level gameplay.

We’ll cover the exact products, how he sets them up, and how you can replicate his configuration. Getting this setup right can make a significant difference in your performance and comfort.

Let’s get straight into the details of Jynxzi’s preferred gear.

What Does Jynxzi Use To Play Clash On Pc

Jynxzi’s PC setup for playing Rainbow Six Siege, specifically the Clash operator, is built around one core principle: using a controller on a PC platform. While many pro players use mouse and keyboard, Jynxzi has mastered the controller, and his setup is designed to give him that console feel with PC-level performance and customization. The centerpiece is a specialized adapter that allows for seamless controller use.

His entire configuration is chosen for reliability, minimal input lag, and the ability to fine-tune his controls. This setup is not overly complex, but each component serves a specific purpose in creating his optimal gaming environment.

The Core Hardware: Controller And Adapter

Jynxzi’s primary input method is a standard Sony PlayStation controller used in conjunction with a specific adapter. This combination is non-negotiable for his playstyle.

Here is the essential hardware list:

  • Controller: Sony PlayStation DualShock 4 or DualSense Controller. He has been seen using both, but the DualShock 4 is a common favorite for its size and button feel.
  • Adapter: The Collective Minds Strike Pack Eliminator for PlayStation 4. This is the most critical piece. It’s a paddle attachment that connects to a standard PS4 controller, adding programmable back buttons.
  • Connection: A high-quality USB cable for a wired connection to his PC. Using a wired connection eliminates wireless latency, ensuring the fastest possible input response.

The Strike Pack adapter is key. It modifys the controller by adding two programmable paddles on the back. These paddles allow Jynxzi to map actions like crouching or leaning without taking his thumbs off the analog sticks, which is crucial for movement and aim in Siege.

Essential Software And Configuration

Hardware is only half the battle. The software setup is what brings Jynxzi’s controller configuration to life on a Windows PC.

You will need the following software:

  • DS4Windows: This is a free, third-party driver tool. It makes your PlayStation controller appear as an Xbox 360 controller to your Windows PC, ensuring maximum game compatibility with minimal fuss.
  • Strike Pack Hub Software: This is the official software from Collective Minds. It is used to update the firmware of the Strike Pack adapter and, most importantly, to program the back paddles. You can set different “mods” and map the paddles to any controller button.
  • In-Game Settings: Jynxzi uses specific sensitivity and deadzone settings within Rainbow Six Siege itself. These are tuned for precise control with an analog stick.

Without DS4Windows, many PC games will not recognize a PlayStation controller properly. The Strike Pack software is equally vital for customizing the paddle functions to your personal preference.

Step-By-Step Setup Guide

Follow these steps to configure your PC just like Jynxzi does. This process will get your controller and adapter working perfectly for Rainbow Six Siege.

Step 1: Install The Necessary Software

Before connecting any hardware, install the software on your PC. This prevents driver conflicts.

  1. Download and install the latest version of DS4Windows. Run it once to set up the initial driver profiles.
  2. Download and install the Collective Minds Strike Pack Hub software from their official website.
  3. Restart your computer to ensure all drivers are loaded correctly.

Step 2: Connect And Configure The Strike Pack

Now, physically set up your controller and adapter.

  1. Attach the Strike Pack Eliminator to the bottom of your PlayStation controller. It plugs directly into the controller’s extention port.
  2. Connect the controller to your PC using a USB cable. The Strike Pack requires power from the cable to function.
  3. Open the Strike Pack Hub software on your PC. It should detect your device.
  4. Update the Strike Pack’s firmware if prompted. This ensures you have the latest features and bug fixes.
  5. Use the software to map the back paddles. Jynxzi typically maps the left paddle to crouch/prone (Circle/B) and the right paddle to lean left (L1/LB), but you can choose what feels best for you.

Step 3: Configure DS4Windows For Siege

With the hardware ready, configure DS4Windows for optimal performance in Rainbow Six Siege.

  1. Open DS4Windows. It should now detect your controller (listed as a “Strike Pack” or similar).
  2. Ensure the profile is set to emulate an Xbox 360 controller. This is usually the default.
  3. In the settings, you can adjust the light bar color and disable the touchpad to save a small amount of system resources, though this is optional.
  4. Most importantly, check the “Hide DS4 Controller” option. This prevents game conflicts by making sure only the virtual Xbox 360 controller is visible to Rainbow Six Siege.

Jynxzi’s In-Game Rainbow Six Siege Settings

Your hardware and software are set up. Now, you need to copy Jynxzi’s in-game control settings. These are calibrated for controller use on PC.

Here are his key settings for Clash and other operators:

  • Controller Sensitivity: He uses a relatively high horizontal and vertical sensitivity for quick turns, but his ADS (Aim Down Sights) sensitivity is lower for precision. Exact numbers vary, but a good starting point is 35-40 Vertical, 35-40 Horizontal, and 25-30 ADS.
  • Deadzones: He sets his controller deadzones very low (around 5). A deadzone is the amount you must move the stick before it registers input. A low deadzone means more responsive aiming but requires a controller with no stick drift.
  • Button Layout: He uses the “Tactical” button layout. This swaps the Circle/B and R3/Right Stick buttons, making crouch/prone easier to access while aiming.
  • Vibration: Turned OFF. Vibration can disrupt aim and is generally disabled by competitive players.

Remember, these settings are a personal preference. Use them as a baseline and adjust slowly based on your own comfort and performance.

Why This Setup Works For Clash

Clash is a unique shield operator that benefits greatly from Jynxzi’s chosen setup. The programmable paddles on the Strike Pack are the secret weapon.

Playing Clash effectively requires constant movement, shield management, and the ability to swap to your secondary weapon or melee quickly. With the paddles, Jynxzi can perform actions like crouching (to protect his feet) or leaning (to look around his shield) without ever removing his right thumb from the right analog stick. This allows for seamless, fluid control of his aim and view while executing defensive maneuvers.

The wired connection and low deadzone settings ensure that every small stick movement is translated instantly to the game, which is critical when you need to react to a flank or adjust your shield angle precisely. This setup minimizes the traditional disadvantages of using a controller on PC.

Alternative Hardware Options

While Jynxzi uses the Strike Pack Eliminator, there are other high-quality options on the market that achieve a similar result. The core idea is adding programmable back buttons.

  • Sony DualSense Edge / Xbox Elite Series 2: These are premium controllers with built-in, mappable back paddles. They are more expensive but offer excellent build quality and direct PC support without needing an extra adapter.
  • Other Adapter Brands: Companies like HexGaming or ExtremeRate sell kits that add back buttons. Some require soldering, while others are clip-on solutions like the Strike Pack.
  • Scuf Controllers: Scuf is a well-known brand for custom controllers with paddles. They are a more expensive, all-in-one solution compared to the adapter route.

If you cannot find a Strike Pack, a controller like the DualSense Edge is a fantastic, though costlier, alternative that Jynxzi himself might consider in the future.

Common Troubleshooting Tips

Setting up this configuration can sometimes run into issues. Here are common problems and their fixes.

Controller Not Detected By DS4Windows

If DS4Windows does not see your controller, try these steps:

  1. Try a different USB cable. Some cables are for charging only and do not transmit data.
  2. Plug the controller into a different USB port on your PC, preferably a USB 3.0 (blue) port on the motherboard’s back panel.
  3. In DS4Windows, go to Settings and try changing the driver installation type (e.g., to “Install HIDGuardian”). You may need to uninstall and reinstall the drivers.

Strike Pack Paddles Not Working

If the paddles do nothing in-game, check these points:

  1. Ensure the Strike Pack Hub software is closed while gaming. The software is only for configuration; it must be closed for the paddles to work in-game.
  2. Verify your paddle mappings in the Hub software. You might have accidentally cleared the profile.
  3. Make sure the controller is in “Tournament Mode.” This disables any rapid-fire mods and ensures only your paddle mappings are active, which is required for fair play.

Input Lag Or Stick Drift

For lag or unresponsive controls:

  1. Always use a wired connection. Bluetooth adds noticeable latency.
  2. Check your TV or monitor for a “Game Mode” setting. This reduces display lag.
  3. If you experience stick drift (the character moves without touching the stick), you may need to increase your in-game deadzone setting slightly or consider cleaning or replacing your controller’s analog stick modules.

Maintaining Your Gaming Setup

To keep your controller and adapter performing like new, a little maintenance goes a long way. Regularly clean your controller with a soft, slightly damp cloth to remove dust and grime. Avoid getting moisture in the crevices.

For the analog sticks, you can use compressed air to blow out debris from around the base. If the rubber grips wear down, you can purchase inexpensive silicone stick covers for better grip and protection. Store your controller and adapter in a dry place when not in use, and avoid yanking the USB cable out by the cord itself.

Taking these simple steps will extend the life of your equipment significantly, ensuring your setup remains reliable for countless gaming sessions.

Frequently Asked Questions

What controller does Jynxzi use for PC?

Jynxzi primarily uses a Sony PlayStation DualShock 4 controller. He attaches a Collective Minds Strike Pack Eliminator adapter to it to add programmable back paddles, which are essential for his gameplay style in Rainbow Six Siege.

Can you use a Strike Pack on PC?

Yes, you can use a Strike Pack on PC. It requires the official Strike Pack Hub software to configure the paddle mappings and a companion program like DS4Windows to ensure the PlayStation controller is recognized correctly by Windows and your games.

How do you set up a PS4 controller for Rainbow Six Siege on PC?

To set up a PS4 controller for Siege on PC, you need to install DS4Windows. Connect your controller via USB, let DS4Windows install the necessary drivers, and ensure the “Hide DS4 Controller” option is checked. Then, you can launch Rainbow Six Siege and adjust your controller sensitivity settings in the game’s options menu.

What are the best controller settings for Clash?

The best controller settings for Clash involve using a layout with back paddles (like Jynxzi’s setup) to keep your thumbs on the sticks. Use the Tactical button layout in-game, set a moderate sensitivity with a lower ADS setting, and minimize your deadzone values for responsive shield and aim control.