If you’re searching for how to get past controls screen go pikachu pc, you’ve hit a common roadblock. Getting past the initial controls screen in *Pokémon: Let’s Go, Pikachu!* on PC emulator often requires proper controller configuration mapping. This guide will walk you through the exact steps to configure your emulator and controller, allowing you to start your Kanto journey without any hiccups.
How To Get Past Controls Screen Go Pikachu Pc
The primary reason players get stuck at the controls screen is simple: the emulator doesn’t recognize any input device. The game waits for you to press “A” to confirm your control style, but if your controller isn’t mapped, nothing happens. This section covers the foundational setup you need to bypass this screen completely.
First, ensure you have a compatible emulator installed. The most reliable emulator for this game is Yuzu or Ryujinx. Both are under active development and run *Pokémon: Let’s Go, Pikachu!* very well. You will also need a legitimate game file (ROM) dumped from your own Nintendo Switch, as downloading copyrighted games is illegal.
Before you even launch the game, take these preliminary steps:
- Connect your controller to your PC via USB or Bluetooth. Common controllers include Xbox, PlayStation, or Nintendo Switch Pro controllers.
- Open your Windows Control Panel or System Settings to verify the controller is detected. You can check in “Devices and Printers” or “Bluetooth & other devices.”
- Launch your emulator. Do not open the game yet. Head straight to the emulator’s settings or configuration menu.
Configuring Your Controller In Yuzu Emulator
Yuzu has a straightforward input configuration system. If you’re using Yuzu, follow these numbered steps carefully to map your controller correctly.
- Open the Yuzu emulator. From the top menu, click on “Emulate” then “Configure…”
- A new window will open. Select the “Controls” tab from the left-hand sidebar.
- Under “Input Device,” select your connected controller from the dropdown menu. It might appear as “XInput” for Xbox controllers or “DSU” for others.
- Set the “Controller Type” to “Pro Controller.” This is the most compatible setting for *Let’s Go, Pikachu!*.
- Now, click on each button field (like “A”, “B”, “Up”, “Down”) and press the corresponding button on your physical controller. This maps the input.
- Pay special attention to the “A” button and the “D-Up” direction. These are critical for the initial screen.
- Click “OK” to save your settings. Now, launch the game from within Yuzu.
Configuring Your Controller In Ryujinx Emulator
Ryujinx’s process is slightly different but equally effective. Here is how to set up your controls in Ryujinx to get past the stuck screen.
- Start the Ryujinx emulator. Look for the “Options” menu at the top and select “Settings.”
- In the Settings window, click on the “Input” tab.
- Under “Input Device,” choose your controller. Ryujinx often lists them by name, like “Wireless Controller.”
- Ensure “Controller Type” is set to “Pro Controller.”
- You will see a list of all buttons. Click on the first one, “Button A,” and then press the “A” or equivalent button on your controller. Repeat this process for every single button and analog stick direction.
- Do not skip the “D-Pad Up” mapping. Sometimes the initial screen can also be navigated with the D-Pad.
- Click “Save” and close the settings. Double-click your game in the Ryujinx library to start it.
Navigating The Initial Controls Screen
With your controller properly mapped, launching the game should now take you to the language selection, followed by the controls screen. This screen asks you to choose between “Button Controls” and “Poké Ball Plus” controls. Here’s what to do.
Use the D-Pad or left analog stick on your controller to highlight “Button Controls.” Then, press the “A” button you just mapped. The game should proceed immediately to the next screen. If it doesn’t, double-check your mapping. A common mistake is mapping “A” to a keyboard key but trying to use the controller, or vice versa.
If you are still stuck, try using your mouse. Sometimes, you can simply click on the “Button Controls” option with your mouse cursor. Not all emulator builds support this, but it’s a useful workaround if available.
Troubleshooting Persistent Controller Issues
Sometimes, even after mapping, the input isn’t registered. This is usually a driver or profile issue. Try these steps:
- Close the emulator completely and reopen it. Sometimes settings need a fresh start to apply.
- Try a different USB port if you’re using a wired controller.
- For Bluetooth controllers, remove the device from your PC’s Bluetooth list and re-pair it.
- Check if your controller works in other PC games or in a browser game tester. This confirms it’s not a hardware fault.
Using Keyboard Controls As A Temporary Solution
If configuring a gamepad proves too difficult, you can use your keyboard to get past the initial screen. Both Yuzu and Ryujinx allow full keyboard mapping.
In the emulator’s control settings, set the “Input Device” to “Keyboard.” Then, map the “A” button to a key like “Enter” or “Z.” Map the arrow keys for directional navigation. While playing the full game with a keyboard is awkward, this method is perfect for simply clicking past the first prompt. After you’re past the controls screen, you can reconnect and reconfigure your controller in the emulator’s settings while the game is paused.
Advanced Emulator Settings For Stability
Getting past the controls screen is one thing, but ensuring smooth gameplay afterward is another. Incorrect emulator settings can cause crashes, graphical glitches, or save file corruption after you’ve begun playing.
Optimizing Graphics And Audio Settings
The right graphics backend is crucial. In Yuzu, go to Emulate > Configure > Graphics. Set the API to “Vulkan” if you have an AMD or NVIDIA graphics card, as it usually offers better performance. If you experience graphical issues, try switching to “OpenGL.” Ensure “Use Disk Shader Cache” and “Use Asynchronous GPU Emulation” are enabled for smoother gameplay.
For Ryujinx, the settings are in Options > Settings > Graphics. The “Graphics Backend” should typically be set to “Vulkan.” Enable “Enable Shader Cache” and “Enable Texture Recompression.” These settings help the game run faster and reduce stuttering as you play.
Managing System And CPU Settings
Accurate system emulation is key for game logic. In Yuzu’s System settings, set “Accuracy” to “Normal.” High accuracy can slow down the game unnecessarily. For Ryujinx, the default CPU settings are usually fine, but if the game runs slow, check the “Logging” tab and disable any enabled logging options, as they can impact performance.
Make sure your emulator is updated to the latest version. Developers constantly release fixes for specific games. An update from a month ago might have solved the exact input issue you are facing.
Common Errors And How To Fix Them
You might encounter specific error messages or behaviors. Let’s address the most frequent ones related to the controls screen.
Game Crashes After Pressing A
If the game proceeds past the controls screen but then crashes or freezes, the problem is likely with your game file or emulator settings. Verify your game file is not corrupted. Try loading it in the other emulator (e.g., if you used Yuzu, try Ryujinx) to see if the problem persists. Also, try running the emulator with administrator privileges, as this can sometimes resolve permission-related crashes.
Controller Input Is Laggy Or Unresponsive
Input lag makes it feel like your button presses are delayed. First, ensure V-Sync is disabled in the emulator’s graphics settings, as it can introduce lag. Next, check your PC’s power settings; make sure it’s set to “High Performance” mode. If you’re using Bluetooth, there might be interference. Consider using a wired connection for a more stable response. Sometimes other software can interfere; try closing background applications.
The Controls Screen Appears In A Different Language
This happens if the game’s system language is set incorrectly. The emulator mimics your Switch’s system settings. In Yuzu, you can change this by going to Emulate > Configure > System. Set the “System Language” to your preffered language, like English. In Ryujinx, go to Options > Settings > System. Change the “System Language” dropdown menu and restart the game for the changes to take effect.
FAQ Section
Here are answers to some commonly asked questions about playing *Pokémon: Let’s Go, Pikachu!* on PC.
Why Won’t My Controller Work In Pokemon Lets Go Pikachu On PC?
Your controller likely isn’t mapped correctly in the emulator. The game itself doesn’t handle controller detection; the emulator does. You must manually assign each button press within the emulator’s control settings before launching the game. Refer to the configuration steps for Yuzu or Ryujinx outlined above.
Can I Use A Nintendo Switch Joy-Con With The Emulator?
Yes, but it requires extra steps. You need to connect the Joy-Con to your PC via Bluetooth and use a program like BetterJoyForCemu to make it appear as an XInput controller. Then, you can select it in the emulator’s input device list. It’s often simpler to use an Xbox or PlayStation controller for plug-and-play functionality.
Is It Legal To Emulate Pokemon Lets Go Pikachu?
Emulator software itself is legal. However, you must dump your own game files (ROMs) from a Nintendo Switch console that you own. Downloading ROMs from the internet for games you do not own is a violation of copyright law. Always ensure you are using legally obtained software.
How Do I Save My Game After Getting Past The Controls Screen?
The game saves in the same way as on the Nintendo Switch. You save your progress by opening the in-game menu (usually the X button) and selecting “Save.” The emulator will create a save file in its designated user folder. It’s also a good practice to regularly use the emulator’s “Save State” feature as a backup, but rely on the in-game save for primary progress.
What Are The Best Settings For Yuzu To Run This Game?
For *Let’s Go, Pikachu!*, use the Vulkan graphics API, enable asynchronous GPU emulation, and set CPU accuracy to “Normal.” Under the “Advanced” graphics settings, enabling “Accelerate ASTC Texture Decoding” can improve texture loading. These settings provide a good balance of performance and visual quality for most systems.
Following this guide should resolve the issue of being stuck at the controls screen. The key is meticulous controller mapping within your chosen emulator. Once past that initial hurdle, you can configure other settings for optimal gameplay. Remember to keep your emulator updated to benefit from the latest fixes and improvements, ensuring a smooth experience throughout your entire adventure in Kanto.